Skip to main content

Knitting a Birdhouse.. Why not?

I found some wire while cleaning the house. After looking at it for awhile I started getting twitchy fingers. "What could I knit with wire?"

A few swatches later, I decided a birdhouse was in order.

There is a technique for knitting with wire, I "pulled" each stitch to make it loose. Also at the end of each row, pull the stitches away from the needle that they are on, and flatten and shape the wire.

You will understand after trying it.

Warning: Wire can be sharp, I did get poked several times, be careful.

Materials:

Needles: Metal 14" size 11 us (I haven't used these since I knitted a burnt orange scarf, I won't even tell you what year that was}

Wire: Floral wire, one bundle 24 gauge (from .99-1.99 at a craft store)

Wire: 18 gauge, I got this from Home Depot, sturdy enough for skeletal support of your house.

Wire cutters, or those sturdy kitchen scissors

Optional: crochet hook size K, or other large size.

Cast on (loose) 24 sts.

Now knit every row for a bit, the first two rows are the hardest, don't give up yet.

Keep knitting it gets easier now

OK, now you have the hang of it! We keep knitting every row until it is long enough to suit you.

(the sides will come together to make a tube, the first and last row will be the back and front of the house}

Long enough? OK now we get the 20gauge wire out and thread it through your last row of stitches.

Now we cut that off and bend it back.

Take your 24 gauge wire and cut it off, leaving it long enough to "stitch" up your tube. Just tuck the end in when done.

Make one or two more skeletal supports for the house one at the other end, and you may need one in the middle if you made your house long.

Add two more 20 gauge wires running from end to end, to keep your house from shrinking back on itself. Cut and bend wires back onto themselves.

Attach one piece of 24 gauge wire, and thread back and forth, weaving an end to your house.

I made a front "hole" for my bird house by using a large crochet hook and sc around the front for 2 rows, stitching in every other stitch.

If you don't want to do this, you could leave it open, or "weave" another end, just around the edges.

You can add a pre bought chain, use a string to hang the house.

I used a K size crochet hook and chained a "chain" to hang it by (with the 24 gauge wire)

Cut the wire and bend it back into the house.

Hang your house up now, and watch the fun begin!

If you make one or have comments or problems, let me know!!

May your needles fly as fast as dragonflies

Bookmark and Share

Comments

  1. This is remarkable. I must try it, thanks for the step by step tutorial!

    ReplyDelete
  2. what an interesting idea! if I had a place to hang one, I'd do it. but they don't encourage things like birdhouses around here. Mostly we have tons and tons of pigeons...and uuuufffff...what a mess they are.

    ReplyDelete
  3. You amaze me.
    How ever did you come up with this idea?

    I hope a bird will take up resident in it. Keep us posted.

    ReplyDelete
  4. What an awesome idea. You might want to add some bits of fiber in there to get the birds started :)

    ReplyDelete
  5. Nice!!! Can't wait to see the occupants.

    ReplyDelete

Post a Comment

Thank you for leaving a comment I love reading them and really appreciate you taking the time to let me know you were here!

Popular posts from this blog

Review of a Kick Spindles Or Mother Marion to spin

When I made the decision to buy a Kick spindle I could find very little info on it, anywhere. Below is what I gathered, bought and my experience with mine. I could only find two being marketed, since I purchased mine I have found a third. Below is my views on the Kick spindle I purchased (Little Meggie from Heavenly Handspinning), and some info on all of the other Kick Spindles that I could locate. Links and costs are included. Review: Things I like about my Kick Spindle. 1. Long spin time, I like the addition of the ball bearing. 2. Leaves both hands free to draft 3. It's my "wheel" 4. I like using my foot, I am moving around and don't get stiff from one position. It's a very "active" type, rhythmic motion. 5. You can actually stand and use it also. 6. Great price point. 7. I have never spun on a wheel and when I sat down at one the first time, I could actually spin (some) I think this action of foot/hand coordination helped. 8.

Aran Shrug, Bridesmaid Wrap, Baby Bunting Pattern free

Here is the start of my "Bridesmaid wrap" from " Wedding Knits " by Suss Cousins. I am making it out of heavier yarn, From Handpainted yarns I love the yarn it is so soft and the colors are beautiful. The wrap is made in mohair in the book. I plan on making it a shorter wrap, due to the heavier yarn. I hope it turns out OK . If you check out the book link, there is photo of it. If you want a free Bridesmaid wrap pattern this is a lovely one from Knitty! I made this baby bunting, on the spur of the moment, just playing around. I used one skein of red heart yarn, and a small amount of the fun fur yarn in a coordinating color. Cast on 80 stitches at 4 sts /inch. Knit in the round, until 24 inches long. If you would rather knit flat, knit even rows, purl odd rows. Add Fun fur yarn, or other novelty yarn for the last 10 rows. Bind off, using a very loose bind off. I like to use the Elizabeth Zimmerman method of the Sewn Bind off

Crochet A Plant Hanger (easy)

It is getting frosty here and the leaves are turning beautiful colors. I had a mass die off of plants, (well, due to my neglect), I did revive a few by repotting.  I brought in some plants from the deck, which Mother Nature took better care of. I decided to hang the larger plants, to save space and didn’t have any plant hangers. I prefer to put my plants in plain clay pots, and had already made my StuffMart run for the week. I got online and looked around for an easy DIY plant hanger. Of course I couldn’t find what I was looking for, although I found some really cute ones that I will link at the end. I was going to macramé one, but when I found some crochet patterns, I thought that would be faster and just as pretty. I looked around and did find a unopened ball of jute, opened it up and got my crochet needle out and started playing around. I’ll place links in the directions in case you don’t know how to crochet, this is super easy. Crochet Plant Hanger (easy) You can customize t