Skip to main content

Review of a Kick Spindles Or Mother Marion to spin

When I made the decision to buy a Kick spindle I could find very little info on it, anywhere. Below is what I gathered, bought and my experience with mine. I could only find two being marketed, since I purchased mine I have found a third.

Below is my views on the Kick spindle I purchased (Little Meggie from Heavenly Handspinning), and some info on all of the other Kick Spindles that I could locate. Links and costs are included.

Review:

Things I like about my Kick Spindle.

1. Long spin time, I like the addition of the ball bearing.

2. Leaves both hands free to draft

3. It's my "wheel"

4. I like using my foot, I am moving around and don't get stiff from one position. It's a very "active" type, rhythmic motion.

5. You can actually stand and use it also.

6. Great price point.

7. I have never spun on a wheel and when I sat down at one the first time, I could actually spin (some) I think this action of foot/hand coordination helped.

8. I think I'm burning calories, so hey, I should be able to eat a cookie after (and probably during) spinning, right?

9. It unspins to wrap onto balls or niddy noddy, very easily.

10. My dogs think it is related to the vacuum cleaner (the arch enemy of all dogs). This could be a pro or con, depending on the animals in your house.

11. The Spindle hold quite a bit of yarn, I have 2 oz on here. see pic, and room for more.

11. It is portable.

12. It is great to ply with, it does it so well, that I might say I would buy it to use for this exclusively.

I think the best description is a cross between a drop spindle and a spinning wheel. My husband is an artist and has done pottery in the past, he sat down and was able to spin very easily, he had tried a drop spindle before without success.

Tips:

1. Watch some of the videos of using a kick spindle on You Tube

2. I have never tried to use it with my hands, only setting with my feet. There is a video on You Tube of a women using it on the table. I talked to a women who uses it while watching TV and doing it by hand.

3. Hold to stabilize with toe of other foot. This balances you also. Both feet are at the same level.

4. It does take some practice to get the motion down. But I have only used hand spindles.

5. It helps me to put a rubber like mat under it to stabilize it.

6. I had trouble getting it "spin" fast enough until I read to add a little Vaseline to the ball bearing.

7. There is a learning curve like everything else, I like to keep the spindle spinning, some spin and stop it to draft and then wind.

Things that I don't like:

1. It does move around a bit, I feel like I have to anchor it with my other foot, and use a rubber mat.

2. It does feel a little "clunky", I'm not sure how else to describe this, I think using a hand spindle is spider like in motion, and feel light, so this be heavy and stable, feels very different. (not sure this is a con, just a different feel)

3. I thought that the hook on the end would be a plus, but I would like to try one without a hook, it does slow me up to have to stop and wind it.

Overall:

I like my kick spindle, it is another option in your spinning arsenal, the one I have is great for the price. I like it well enough that I would like to try a more expensive one. And I would definitely purchase this one again.

It is not a replacement for a spindle or a wheel, but a compliment to them.

I understand now why people have multiple wheels.

If you own a Kick spindle I would enjoy any comments you have.

Heavenly Handspinning Kick Spindle

I bought a Mother Marion or Kick spindle a bit ago from Heavenly Handspinning. It was the right price, and at the time I could only find that one and the Woolrey had one.

P6040019_Resize $55.00 us price (the lowest price)

He sells from his website, on Etsy, (where I found him)

Little Meggie" has been updated, with the addition of a radial ball bearing. The spindle base rests in the ball bearing, creating a longer spin.

I tried to find some history on this spindle, but the only info I could find was it is recently developed.

There are several You Tube videos of this one, including how to assemble it.

See it in use here and here.

This company also makes a couple of quirky spinning wheels that includes a bicycle wheel.

 

Below is from the maker:

This spindle/wheel is also called Mother Marion's Magnificent Spinning Machine. This type of wheel was developed in 1981 and named after the inventor's mother-in-law. Heavenly Handspinning has updated this wonderful device, which works similarly to a drop spindle, but will allow you to sit or stand while spinning, freeing both hands for working with the roving.

The wheel is turned with your foot or hand (depending on whether it's placed on the floor or a table) and spinning occurs off the tip and hook. The length and stationary aspect of this wheel make it an excellent choice for plying.
The combination of light-weight, portability and ease of use, make this wheel/spindle - perfect to take anywhere.
"Little Meggie" has been updated, with the addition of a radial ball bearing. The spindle base rests in the ball bearing, creating a longer spin.
The wheel is handmade by Heavenly Handspinning. The wheel's base is made of oak. The rest of the assembly is made of oak and hardwood. The base is 8 inches in length and the total height from hook tip to base bottom is approximately 13 inches. The wheel measures 4 inches in diameter.

__________________________________________________________________________

The Woolery Kick Spindle

I found a few to choose from online, The Woolery has one.

I believe this one does not have a hook at the end of the spindle, working more like a walking wheel spindle.

You tube has a video of someone using this kick spindle on the table with her hands, and it appears to turn very smoothly. http://uk.youtube.com/watch?v=GFPA3BcCMyo

 

 

 

$98.00 us price (midrange price)

wheel_kick This one is similar and shows another position variation

Below from the Woolery:

Also called Mother Marion's Magnificent Spinning Machine, this handy spindle works much like a drop spindle but allows you to sit down while spinning. Just turn the large whorl with your foot (or place it on a table and use your hand) and spin off the tip of the spindle.

Beautifully crafted of cherry or walnut and hand-finished with several coats of Danish oil and a final coat of Crystalwax finishing wax for a nice sheen. Each spindle has been spun-tested by the manufacturer and comes with instructions and a starter spun yarn. Base is 5" x 12", height from base to top of spindle is 15" and diameter of kick wheel is 5 3/4". A wonderful portable tool and a sure conversation piece.

_______________________________________________________________________

 

True Creations

True creations

I only found this one recently, looks beautiful, folds flat, the spindle has no hook, and from the photo appears to have a ball bearing at the base of the spindle.

I contacted the maker for the price and info.

Price $500.00 (pricey, but as we spindlers know, usually cheap spindles do not perform as well as more expensive ones)

If you are familiar with the Golding drop spindles this may be the kick spindle version of it.

He also makes drop spindles, and has me drooling over this kick spindle.

If anyone out there has one of these are knows someone that does, I would love to hear from them.

 

 True Creations

I emailed Jim Echter and he gave me the below info.

kick spindle is a cross between a traditional spindle (great wheel) and a drop spindle.  Think of a potter's wheel for spinners.
It is put on the floor while the spinner sits in a chair.  You draft the fiber at a 45 degree angle off the tip of the spindle just like you do on a traditional spindle wheel.  With our design, you can achieve a high spin rate because you drag the side of your foot across the bottom of the spindle below the flywheel and we use two high precision bearings.  Most folks find it best to wear a sneaker or other soft shoe. Due to the diameter of the bottom of the spindle shaft, you get a great spin rate. On other types of kick spindles, you need to kick the flywheel so it is difficult to achieve as high a spin rate.  The spinner I worked with during the design process (who is a kick spindle expert), can get such a long draw of our spindle that she actually has to stop it as her arms aren't long enough to finish her draw!
Our kick spindle has a carrying handle built in as part of the base that can also be used to hang the spindle on the wall.  You can also easily remove the shaft and flywheel and fold the support arm down for storage.
The kick spindle is about 23" long x 8" wide x 15" high.  The spindle shaft above the whorl is approximately 8" long.  The whorl is 3 to 3.5" in diameter, although since I custom build each kick spindle, I can make it just about any diameter you desire and out of any kind of exotic wood.  I have all sorts of interesting whorl woods as I also make high end drop spindles.  The spindle will hold a fair amount of yarn depending on how thick you spin it.
Our web site has more information about the spindle and how my personal spindle is currently traveling the country on display with a major woodturning exposition called "Turned for Use II".  You can check it out at:
www.truecreations.biz.  I just finished making a video on our products, including the Kick Spindle.  I hope to have it added to our web site within a few days.

jim@truecreations.biz for more info.

 

May your spindles fly as fast as dragonflies!!

 

 

 

 

Bookmark and Share

Comments

  1. Hmm...well now you've given me something else to think about in regards to my spinning equipment. Thanks for the information!

    ReplyDelete
  2. Interesting! I have never even heard of such a thing!

    ReplyDelete
  3. I have the one from Woolery, without the hook, and I really like it. I spin with my hand rather than my foot because it's more comfortable for me, but I can see how using the foot would be a bit faster.

    The video of the woman using her hand looks a lot more awkward than how I use it. But I don't do the long draw like she does. That would seriously bother my shoulders (fibromyalgia.)

    Thanks for the reviews. I love being able to compare them. I'm pretty happy with the one I've got though.

    ReplyDelete
  4. Very interesting, I was not familiar with kick spindles.

    ReplyDelete
  5. Anonymous11/18/2008

    Fantastic review!
    It is awfully tempting to get one ... just to try it out, but I haven't been spinning in over 2 weeks. I should get back to the craft first before I buy more stuff for it. Grin.

    ReplyDelete
  6. This is an excellent review and explanation!

    ReplyDelete
  7. I think my heart just broke a little :( I found your site through a google search for the True Creations kick spindle.... $500!!!!! Ouch. Guess I'll be wanting that one for a loooong time, lol.

    ReplyDelete
    Replies
    1. They've come down some in price now, $375 plus $50 shipping totaling $425.

      Delete
  8. We are learning how to spin. Someone gave us some raw llama fiber so we began to search how to prepare the fleece for spinning in the search we came acorss little maggie. We had not purchase a drop spindle yet and after studying the little maggie I thought it would be a great project for my girls(12 & 11) to make one. So we did. And later this week when our carders come in we will begin to card the fleece. We've already washed, rinsed, dried and pick it out. The girls are on pins and needles waiting to use their kick spindles. :-D

    ReplyDelete
  9. I just got one from Heavenly, and LOVE it! Well constructed, and the yarn I'm spinning on it right now (Merino top) is turning out sweet and smooth. I would recommend this to EVERYONE who spins, whether on a wheel or spindle. A great spinning tool for travel if you don't want to put out for the more expensive folding Wheels.

    ReplyDelete
  10. Just got mine from Heavenly and I LOVE it! A great spinning tool if you travel and can't afford a foldable wheel. Currently spinning Merino Top on it and it's coming out beautifully!

    ReplyDelete
  11. I just got one from Heavenly, and LOVE it! Well constructed, and the yarn I'm spinning on it right now (Merino top) is turning out sweet and smooth. I would recommend this to EVERYONE who spins, whether on a wheel or spindle. A great spinning tool for travel if you don't want to put out for the more expensive folding Wheels.

    ReplyDelete
  12. This is a really good review of a machine I've only just heard of! I want to buy a spinning wheel, but thanks to all this information I think I might try a kick spindle first. I'm used to using a drop spindle. Thank you :-)

    ReplyDelete
  13. Oh, and I just read your header about trolls and dragonflies - fascinating!!

    ReplyDelete
  14. Do you use the hook on end?

    ReplyDelete
  15. I do use the end hook but some kick spindles do not have it.
    Vicki

    ReplyDelete
  16. Just so you know the True Creations Kick Spindle has reduced in price over time to $375 and is gorgeous and so very expertly made! I love mine and have another different brand that I had acquired before the TC one and it doesn’t even compare in quality, beauty or function!

    ReplyDelete

Post a Comment

Thank you for leaving a comment I love reading them and really appreciate you taking the time to let me know you were here!

Popular posts from this blog

Aran Shrug, Bridesmaid Wrap, Baby Bunting Pattern free

Here is the start of my "Bridesmaid wrap" from " Wedding Knits " by Suss Cousins. I am making it out of heavier yarn, From Handpainted yarns I love the yarn it is so soft and the colors are beautiful. The wrap is made in mohair in the book. I plan on making it a shorter wrap, due to the heavier yarn. I hope it turns out OK . If you check out the book link, there is photo of it. If you want a free Bridesmaid wrap pattern this is a lovely one from Knitty! I made this baby bunting, on the spur of the moment, just playing around. I used one skein of red heart yarn, and a small amount of the fun fur yarn in a coordinating color. Cast on 80 stitches at 4 sts /inch. Knit in the round, until 24 inches long. If you would rather knit flat, knit even rows, purl odd rows. Add Fun fur yarn, or other novelty yarn for the last 10 rows. Bind off, using a very loose bind off. I like to use the Elizabeth Zimmerman method of the Sewn Bind off

Crochet A Plant Hanger (easy)

It is getting frosty here and the leaves are turning beautiful colors. I had a mass die off of plants, (well, due to my neglect), I did revive a few by repotting.  I brought in some plants from the deck, which Mother Nature took better care of. I decided to hang the larger plants, to save space and didn’t have any plant hangers. I prefer to put my plants in plain clay pots, and had already made my StuffMart run for the week. I got online and looked around for an easy DIY plant hanger. Of course I couldn’t find what I was looking for, although I found some really cute ones that I will link at the end. I was going to macramé one, but when I found some crochet patterns, I thought that would be faster and just as pretty. I looked around and did find a unopened ball of jute, opened it up and got my crochet needle out and started playing around. I’ll place links in the directions in case you don’t know how to crochet, this is super easy. Crochet Plant Hanger (easy) You can customize t