Skip to main content

Well a women has the right to change her mind…

091

How many times have you bought all of the supplies for a project to knit, and then changed your mind about the yarn, or pattern?

This seems to happen to me all too often. The above was a purchase several years ago. Somewhere along the line I decided I didn’t want to use the pattern I bought. I think it was due to the fact that I detest knitting a sweater in separate pieces and putting it together. I love to knit in the round.

I discovered this after finding my first Elizabeth Zimmerman book, Knitting without Tears! Her techniques and insistence on swatching for your gauge, turned me into a super sweater knitter. Her patterns were the first I could actually wear! Usually I would have to gift my knitted sweater to someone, anyone that was the size the sweater was. And while this had a certain excitement, and drama, I actually wanted a sweater for myself. Elizabeth's in depth explanation of gauge and how to calculate your size, finally made me realize how important gauge was, and what to do with “my gauge”, with her percentage system.  I was off and running, well knitting.  I would urge any knitter to read the above book if you haven’t. Her patterns are bottom up in the round, now I’ve discovered top down, in the round patterns!

 

Searching for a new pattern was a quest, I wanted a bulky sweater top down, knit in the round. In Fall of 2010 I found this pattern from Knitty, Iced cardigan by Carol Feller! I was tripped up with the gauge and “forced” my super bulky yarn onto needles that were much too small for it. Therefore, a terrible knitting experience. I was crawling along (with bulky yarn, no less, which is usually such a fast knit), and not enjoying it at all. Producing a sweater that was so dense it would probably hold water and deflect bullets!

007

Before photo, gauge too tight for this yarn, stiff sweater, ugh…

Finally I stopped and looked at it, and tried it on. (one of the benefits of top down knitting, and realized it was stiff and still too big, way big.

A frogging I go.Redeyed_Tree_Frog Plan B, now I’m using a larger needle and knitting a smaller pattern size. For example, my gauge is now 25% larger than the stated gauge, so instead of doing some math myself. I can just look at the sizes, her XS is about 25% smaller than the size I want (at the stated pattern gauge). Hence, I cast on for the XS, and now I’m off and knitting! Of course this doesn’t work every time, but if you are in the average or medium size, this can be a great “cheat” especially when a pattern has lace or cabling etc.… in it.

001

After photo, gauge is more relaxed, sweater correct size.

dancing in the rain

"Life is not about waiting for the storms to pass... it's about learning how to dance in the rain."

Comments

  1. I have serious commitment issues when it comes to deciding on a pattern. I have,at times, frogged my projects so many times, I've ruined the yarn.

    ReplyDelete
  2. I didn't know you could do a sweater without putting all the parts together. Is that how they do Fair Isle knitting?

    ReplyDelete
  3. Now you really need to explain what frogging is, I was thinking you were talking about blocking. Now I'm lost. I appreciate your shared lesson, I still don't gauge before I start a project and end up with huge items!!! My bad, I need that book. Thanks!

    ReplyDelete
  4. Sorry frogging is taking out everything that has been knitted, as in ripit, ripit, ripit, LOL
    Yes the book really helped me also! You can usually check it out from a library and look at it first!
    Good luck
    Vicki

    ReplyDelete
  5. Hmmm... hadn't thought about using a smaller size sweater when my gauge is off. I've been reading about Debbie Stoller's method of recalculating the pattern to accommodate a difference in stitch or row gauge. I can usually get stitch gauge... but rarely get row gauge. Since I'd love to start designing my own patterns I think I'm going to start recalculating patterns based on my OWN gauge rather than someone else's!

    Then again, I could just take the easy way out and buy the Sweater Wizard software :-)

    ReplyDelete

Post a Comment

Thank you for leaving a comment I love reading them and really appreciate you taking the time to let me know you were here!

Popular posts from this blog

Review of a Kick Spindles Or Mother Marion to spin

When I made the decision to buy a Kick spindle I could find very little info on it, anywhere. Below is what I gathered, bought and my experience with mine. I could only find two being marketed, since I purchased mine I have found a third. Below is my views on the Kick spindle I purchased (Little Meggie from Heavenly Handspinning), and some info on all of the other Kick Spindles that I could locate. Links and costs are included. Review: Things I like about my Kick Spindle. 1. Long spin time, I like the addition of the ball bearing. 2. Leaves both hands free to draft 3. It's my "wheel" 4. I like using my foot, I am moving around and don't get stiff from one position. It's a very "active" type, rhythmic motion. 5. You can actually stand and use it also. 6. Great price point. 7. I have never spun on a wheel and when I sat down at one the first time, I could actually spin (some) I think this action of foot/hand coordination helped. 8.

Aran Shrug, Bridesmaid Wrap, Baby Bunting Pattern free

Here is the start of my "Bridesmaid wrap" from " Wedding Knits " by Suss Cousins. I am making it out of heavier yarn, From Handpainted yarns I love the yarn it is so soft and the colors are beautiful. The wrap is made in mohair in the book. I plan on making it a shorter wrap, due to the heavier yarn. I hope it turns out OK . If you check out the book link, there is photo of it. If you want a free Bridesmaid wrap pattern this is a lovely one from Knitty! I made this baby bunting, on the spur of the moment, just playing around. I used one skein of red heart yarn, and a small amount of the fun fur yarn in a coordinating color. Cast on 80 stitches at 4 sts /inch. Knit in the round, until 24 inches long. If you would rather knit flat, knit even rows, purl odd rows. Add Fun fur yarn, or other novelty yarn for the last 10 rows. Bind off, using a very loose bind off. I like to use the Elizabeth Zimmerman method of the Sewn Bind off

Crochet A Plant Hanger (easy)

It is getting frosty here and the leaves are turning beautiful colors. I had a mass die off of plants, (well, due to my neglect), I did revive a few by repotting.  I brought in some plants from the deck, which Mother Nature took better care of. I decided to hang the larger plants, to save space and didn’t have any plant hangers. I prefer to put my plants in plain clay pots, and had already made my StuffMart run for the week. I got online and looked around for an easy DIY plant hanger. Of course I couldn’t find what I was looking for, although I found some really cute ones that I will link at the end. I was going to macramĂ© one, but when I found some crochet patterns, I thought that would be faster and just as pretty. I looked around and did find a unopened ball of jute, opened it up and got my crochet needle out and started playing around. I’ll place links in the directions in case you don’t know how to crochet, this is super easy. Crochet Plant Hanger (easy) You can customize t